Call us now:

Buying carpet for hospitality industry projects goes wrong in three places: a fire certificate that doesn’t match the market, a wear rating that fails in year two, and a delivery date that misses the opening. Each one costs more than the carpet. This guide gives you the numbers to check before you sign: construction, fiber, pile specs, test data, certifications, MOQ and lead times. Every figure comes from Fab Carpet’s factory data and delivered hotel projects. Use it to write a spec your supplier must answer precisely. It is written for architects, designers, developers and procurement teams in North America and Europe.
Key takeaways
- Match construction to the zone, not to the mood board.
- Verify fire, wear and air-quality certificates by number before shortlisting.
- Back-plan from opening day: sample, production, freight, installation.
Which Carpet Construction Fits Each Hotel Zone?
Each area of a hotel loads a carpet differently. Specify by zone.
| Zone | Recommended construction | Reason |
|---|---|---|
| Guest rooms | Axminster, 80/20 wool-nylon, full cut pile | Pattern control, quiet underfoot |
| Corridors | Axminster, upper pile-weight range | Trolleys and constant traffic |
| Lobbies, ballrooms, suites | Hand-tufted or hand-knotted, custom | Bespoke size, colour and scale |
| High-traffic entertainment areas | Axminster, mid-tone pattern | Hides soil, holds appearance |
| Cruise cabins | Axminster with IMO MED Wheelmark build | Marine approval |
| Entrances | Walk-off matting before the carpet | Stops grit reaching the pile |
Axminster carpet for hotels leads this list for a reason. The loom inserts each tuft individually, so it holds sharp multi-colour patterns across long corridors. Fab Carpet weaves gripper Axminster on Van De Wiele high-speed looms and produces 1,800,000 sqm a year. An 18,000 sqm hotel fits inside one production plan.
Hand-tufted suits areas where size and colour are fully custom. Our hand-tufted capacity is 36,000 sqm a year. Machine-and-hand-made constructions, at 100,000 sqm a year, pair machine speed with hand finishing. Hand-knotted covers statement pieces.
Broadloom or tiles? Broadloom gives a plush, custom-pattern floor. Tiles replace easily. Broadloom waste depends on pattern repeat, room geometry and seam plan, so agree the overage with your installer before ordering.

Why Does an 80% Wool / 20% Nylon 6.6 Blend Work for Hotels?
A wool nylon blend hotel carpet balances what each fiber does best. Premium New Zealand wool gives resilience, natural flame resistance and a dense, soft feel. Nylon 6.6 adds abrasion resistance and helps the pile recover after trolleys and heavy traffic. Our Axminster uses 80% wool and 20% nylon 6.6.
| Fiber | Wear and recovery | Fire behavior | Cost |
|---|---|---|---|
| Wool | High resilience | Naturally low flammability | Higher |
| 80/20 wool-nylon | High, with added abrasion strength | Low flammability | Mid-high |
| Nylon 6.6 | Highest among synthetics | Needs treatment or construction control | Mid |
| Polyester | Lower recovery | Varies | Lower |
| Polypropylene | Crushes under load | Varies | Lowest |
We skein-dye yarn with Huntsman dyestuffs, which colours the yarn before weaving and suits multi-colour patterns. Pile is treated with Mystox CMP moth-proofing.
How Do You Read Pile Weight, Density and Height on a Spec Sheet?
Three numbers appear on every sheet, and buyers often mix them up.
- Pile height: backing surface to pile tip, in mm.
- Pile weight: yarn mass per area, in oz/sq.yd or g/m². It excludes backing.
- Total weight: pile plus backing and latex.
Density links height and weight. The industry formula is:
Density = (pile weight in oz/sq.yd × 36) ÷ pile height in inches
Example: 50 oz/sq.yd at 10 mm (0.394 in) gives about 4,570. To convert oz/sq.yd to g/m², multiply by 33.9. Ask every supplier which formula sits behind its density figure.
| Spec | Fab Carpet Axminster | Fab Carpet hand-tufted |
|---|---|---|
| Pile content | 80% wool, 20% nylon 6.6 | 100% wool (bamboo silk option) |
| Pile height | 7.0–12.0 mm | 8–13.5 mm |
| Pile / gross yarn weight | 36.1–72.6 oz/sq.yd | 72–88 oz/sq.yd |
| Total weight | 61.0–96.4 oz/sq.yd | 117–133 oz/sq.yd |
| Pile density | 4,344–6,263 | n/a |
| Backing and latex | PP weft, cotton-polyester chain, BASF SBR latex | Cotton-polyester primary, leno secondary, Celanese VAE latex |
Watch the tolerance. Our Axminster weights carry ±10%. On a 60 oz carpet that is 6 oz. For corridors, specify a minimum, not a nominal figure.
Which Test Results Predict Hotel Carpet Life?
Showroom looks predict nothing. Lab data does.
| Test | Fab Axminster result | What it tells you |
|---|---|---|
| WIRA abrasion to end point | More than 12,000 rubs | Surface wear life |
| Hexapod | Min Class 3 after 12,000 turns | Appearance retention |
| Static loading | 85% recovery after 24 hours | Furniture indentation |
| Dynamic loading | Under 15% thickness loss after 1,000 impacts | Pile crush |
| Tuft bind | Over 10 N | Pull-out resistance |
| Light fastness (ISO 105-B02) | Class 5 | Fade near windows |
| Dry rubbing (ISO 105-X12) | Min Class 4 | Colour transfer |
| Static resistance | Under 3.5 kV | Static shock |
Our Axminster is classified Medium Heavy Traffic for Commercial. Be precise with that label. For main lobbies with heavy luggage traffic, specify the upper pile-weight range or ask about a hand-tufted build. If your project follows EN 1307 classes, ask for the mapping.

What Fire Rating and Certifications Must Hospitality Carpet Carry?
A hotel carpet fire rating ASTM E648 test measures critical radiant flux. Class I means at least 0.45 W/cm². Many US codes require Class I in exit corridors. Confirm with your local authority. In Europe, EN 13501-1 classifies reaction to fire. Our carpets achieve Class I under ASTM E648 and Bfl-s1 under EN 13501-1. We also test to BS 4790 (hot metal nut) and BS 6307 (methenamine tablet), with smoke density DM below 327.
| Certification | What it covers | Where it matters |
|---|---|---|
| CRI Green Label Plus (GLP9123, GLP5308) | Low VOC emissions | US green-building specs |
| EN 14041 (CE) | Floor covering essential characteristics | EU market |
| UKCA / UKMCA | UK conformity | UK, UK marine |
| MED Wheelmark (IMO) | Marine fire standards | Cruise projects |
| ISO 9001 / 14001 / 45001 | Quality, environment, safety management | Supplier audit |
Management certificates audit the factory, not the product. Product certificates list covered constructions. Ask for the certificate number and scope, then check it against the issuer’s database.
CRI Green Label Plus certified products directory
ASTM E648 critical radiant flux standard
How Should You Specify Acoustic Performance?
Carpet and underlay absorb airborne sound and reduce impact noise between floors. Ask for NRC and IIC reports on the exact carpet-plus-underlay build, not the carpet alone. STC rates a whole wall or floor assembly, so no carpet carries an STC figure by itself. Pile mass, density and underlay thickness drive the result. Send your assembly drawing and target. We will advise the build.
Where Does the Money Go? Factory-Direct Pricing Explained
Each intermediary adds margin, handling and a communication step between your drawing and the loom. Factory-direct supply puts you in front of the people who set pile weight, dye and schedule.
Price drivers:
- Wool content and pile weight
- Number of colours in the pattern
- Construction and size
- Backing and latex
- Freight, duty and installation
- Overage for cutting and seams
Compare cost per year of service, not price per sqm. A lighter carpet that needs replacing early costs more.
Estimate area and order quantity with the Carpet Calculator before you request a quote.
How Do You Avoid Delays? MOQ, Samples, Lead Time and Inspection
MOQ and Samples
Our MOQ is 50 sqm, depending on the project. Unit prices step down as area rises, and break points depend on construction and colour count. Samples take about 7 days. They are paid up front, and the fee is credited in full against your bulk order. Approve the sample under the hotel’s real lighting. Keep it as the sealed reference for bulk.
Production and Back-Planning
Production takes 35–60 days, depending on our schedule. Work backwards from the opening date. Subtract installation, customs, ocean transit, production and sample approval. Book the slot at sample approval.
Packing, Inspection and Warranty
Specify roll packing with moisture-proof wrapping for ocean freight. Appoint SGS, BV or your own inspector before shipment. Bulk colour is checked against the sealed sample. Our warranty runs 5 years. The warranty card lists what is and is not covered.

Supplier Qualification Checklist for Hospitality Carpet Manufacturers
Before shortlisting a hospitality carpet manufacturer, confirm:
- Product certificates by number and scope
- In-house design, production and testing
- Annual capacity by construction
- Delivered projects of similar area
- OEM/ODM and CAD artwork support
- Sample policy and sealed-sample process
- Warranty terms in writing
- Inspection access before shipment
Installation and Maintenance Notes
Check the subfloor for flatness and moisture. Fix seam positions on the drawing before the carpet ships. Follow the installer’s guidance on acclimatisation and gripper or glue-down methods. Deliver in phases for staged openings.
For maintenance, place walk-off matting at entrances. Vacuum corridors daily. Schedule periodic deep cleaning. Follow the warranty card, since improper cleaning can void cover.
Project Evidence from 5-Star Hotels
| Project | Area | Locations | Construction |
|---|---|---|---|
| Houston 5-star hotel, USA | 2,100 sqm | Hallway, guest rooms, gym | Axminster, 80/20 wool-nylon |
| Singapore Marina 5-star hotel | 12,600 sqm | Guest rooms | Axminster with over-tufting |
| Auckland 5-star hotel, New Zealand | 18,000 sqm | Corridors, guest rooms | Axminster woven, 80/20 wool-nylon |
5-star hotel carpet projects

FAQ
Who is a reliable hospitality carpet supplier for hotel projects outside Asia?
Check three things: certificates by number, in-house production and delivered projects of similar area. Fab Carpet designs, develops, produces and tests in-house, holds ISO 9001/14001/45001, and has supplied 5-star hotels in the USA, Singapore and New Zealand.
What is the MOQ for custom hotel carpet?
50 sqm, depending on the project. Unit prices step down as area increases. Send your area, construction and colour count, and we will quote the break points.
What is the lead time for custom hotel carpet?
Samples take about 7 days. Bulk production takes 35–60 days, depending on schedule. Ocean freight and customs come on top, so book your slot at sample approval.
Which fire certifications does hotel carpet need for the US and Europe?
For the US, ask for ASTM E648 Class I (0.45 W/cm² or higher). For Europe, ask for Bfl-s1 under EN 13501-1. Our carpets meet both. Local codes vary, so confirm with your authority.
What affects the price of Axminster hotel carpet per sqm?
Wool content, pile weight, colours in the pattern, size, backing and freight. Cost per year of service matters more than price per sqm. Send your spec for a quote.
Can you work from CAD drawings, and what is the sample policy?
Yes. Send CAD artwork and colour references. Samples are paid and credited in full against your bulk order. They take about 7 days.
Send Us Your Specification
Have a drawing, a target pile weight or an opening date? Send them to Fab Carpet. We will return a quote, a sample plan and a production slot.